Bmw 550i Motor Oil?

What kind of oil does a BMW 550i take?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals.

What kind of oil does a 2011 BMW 550i take?

Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.

What kind of oil does a 2008 BMW 550i take?

Castrol Edge Synthetic Motor Oil 5W-40 1 Quart.

Is it OK to use 5W30 instead of 5w40?

If you are racking your brain to choose between 5w30 and 5w40, we recommend you go with 5w30. However, if it is too expensive or not available for use, you can always go with the 5w40, which is just as good and will not cause any damage to the engine parts.

What’s the best oil for BMW?

Oil for most BMW passenger vehicles and SAVs:

Mobil 1 SAE 0W-40. Valvoline SynPower SAE 5W-30. Castrol Syntec European Formula SAE 0W-30. Beginning in 2015, BMW is recommending Shell/Pennzoil PurePlus Oils as their aftermarket oil.

You might be interested:  Audi Flagship Car?

What brand of oil does BMW recommend?

Since Shell is the producer on Pennzoil® motor oils, Pennzoil is now the recommended oil for BMW engines.

How much is an oil change for a BMW 550i?

The average cost for a BMW 550i oil change is between $195 and $232. Labor costs are estimated between $44 and $56 while parts are priced between $151 and $177.

What is the difference between 5w30 and 5w40?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

Can I use Castrol EDGE in my BMW?

Yes you can, but Castrol 0w-30 is a better choice, also BMW 5w-30 or M1 0w-40 are all better oils. Yes, that is fine. You don’t need to run 15,000 mile change intevals, so long life is irrelevant.

How much oil does a 2008 BMW 550i take?

8.5 qts including a filter change.

What happens if you put wrong oil in car?

Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so. Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so.

What does 5W 30 oil mean?

5W30 means that this is a multigrade oil. This is indicated by the two numbers separated by a “W” 5W – shows thickness/viscosity of the oil on a start-up – when you start the car (W – stands for Winter, this indicates oil performance under colder engine temperatures when the engine has not been running)

You might be interested:  FAQ: Is A Buick Enclave A Good Car?

Can I use 10w 40 instead of 5w40?

10w40 is thicker than 5w40, ONLY when cold. At operating temperature it is exactly the same. Multi-viscosity oils with a lower W number are specifically designed to flow better, and thus lubricate better, at very low temperatures. There is no need to use a 5w-40 if the vehicle only requires 10w40.

Leave a Reply

Your email address will not be published. Required fields are marked *